1. Hello Guest, selamat datang di Forum WinPoin. Kamu bisa bertanya, berdiskusi, sharing, dan ngobrolin apapun seputar Windows, Windows Phone, PC, Gadget, atau hal seputar Teknologi lainnya. Selamat berkomunitas! ;)

Ask bagaimana cara atasi BSOD:0x00000116

Discussion in 'Windows 7' started by ReyMarelly, Mar 31, 2016.

  1. ReyMarelly

    ReyMarelly New Member

    Joined:
    Mar 30, 2016
    Messages:
    19
    Ka rizal:
    Ok ka, nanti ku coba lg pakai aplikasi driver lain nya :)
     
  2. ReyMarelly

    ReyMarelly New Member

    Joined:
    Mar 30, 2016
    Messages:
    19
    Ka ilham:
    Kurang lebih seperti ini ka :3
     

    Attached Files:

  3. ReyMarelly

    ReyMarelly New Member

    Joined:
    Mar 30, 2016
    Messages:
    19
    ka: Rizal Faisal Akbar:
    jd klo vertical line ini ilang(seperti di gambar), bisa bebas mau ngapain aja mau install AMD nya lngsng jga bisa :3
    tapi itu kadang ilang, kadang jga ga ilang" itu vertical line nya :3
    IMG_20160330_015617.jpg
    IMG_20160402_102838.jpg
     
  4. ilhamajah04

    ilhamajah04 Well-Known Member

    Joined:
    Nov 27, 2013
    Messages:
    4,725
    itu ada slot nganggur di samping VGA Card nya.... pindahin kesana coba...
    kalo masih gak bisa, Install driver di Boot mode yang No driver Installed
     
  5. Rizal Faisal Akbar

    Rizal Faisal Akbar Well-Known Member

    Joined:
    Sep 9, 2015
    Messages:
    2,477
    vertical line? Itu emang muncul sejak masuk windows atau pas awal nyalain komputer udah gitu?
     
  6. ReyMarelly

    ReyMarelly New Member

    Joined:
    Mar 30, 2016
    Messages:
    19
    Ka rizal:
    Itu pas nyalain computer udh gtu :3
     
  7. Rizal Faisal Akbar

    Rizal Faisal Akbar Well-Known Member

    Joined:
    Sep 9, 2015
    Messages:
    2,477
    kalo dari awal bios udah kayak gitu kayaknya antara lcd-nya yang udah mati sebagian atau kabel vga-nya ada yang putus
     
  8. ReyMarelly

    ReyMarelly New Member

    Joined:
    Mar 30, 2016
    Messages:
    19
    Ka rizal:
    Tapi ka, klo dari lcd/kabel vga tadi mlm tuh kembali normal, dan seperti biasa pagi nya muncul lg :3
     
  9. ReyMarelly

    ReyMarelly New Member

    Joined:
    Mar 30, 2016
    Messages:
    19
    Ka ilham:
    Mksd nya masuk dari boot mode gmn ka :3 btw, itu slot nya ga muat untuk vga
     
    Last edited: Apr 4, 2016
  10. Rizal Faisal Akbar

    Rizal Faisal Akbar Well-Known Member

    Joined:
    Sep 9, 2015
    Messages:
    2,477
    agak aneh juga ya.
     
  11. Rizal Faisal Akbar

    Rizal Faisal Akbar Well-Known Member

    Joined:
    Sep 9, 2015
    Messages:
    2,477
    btw saya liat artikel ini. dalam artikel tersebut ada hubungannya dengan refresh rate (konfigurasi di Display Adapter Properties). Mungkin bisa dicoba. :)

    How to Fix Vertical Lines on the Computer Screen
    by Andrew Aarons, Demand Media


    Computer screens, like any component of a computer system, work or fail to work because of a series of possible factors: the input from the computer, the settings on the screen, and the performance of the screen itself. If you are seeing vertical lines on your screen, one of a few things might be happening. Sometimes the fix is simple and straightforward, and other times fixing vertical lines will require some troubleshooting.

    Step 1
    Power down the computer and unplug all peripherals. If you are using a laptop, take its battery out by flipping it upside down and sliding the battery release latch. Press and hold the power button for 15 or 20 seconds to clear all residual power from the system. Some of the computer’s power might have been transmitting to the monitor, causing it to short out. Reconnect everything and turn the system back on to see if the lines are gone.

    Step 2
    Unplug the monitor from the back of the computer and wait a few seconds until it displays a message “No signal.” If the no signal message also has vertical lines, you know the problem is in the monitor and not in your computer. Press the “Menu” button on the screen and then use the other buttons to browse for a “Factory Settings” mode. Select this mode to reset the monitor to its original settings. If the lines persist, the monitor may have been dropped or exposed to a magnet -- which can’t be fixed.

    Step 3
    Reconnect and turn the computer back on. Look for the lines at boot up: if you see lines before Windows loads, the problem is either with the video card, the video connection cable -- whether HDMI or VGA -- or the monitor itself. If the lines only appear in Windows, the problem is a Windows setting -- most likely the refresh rate. Right-click on the Desktop once Windows loads and choose “Screen Resolution.” Click “Advanced Settings,” “Monitor,” and then lower the refresh rate to see if the lines disappear.
     
  12. ReyMarelly

    ReyMarelly New Member

    Joined:
    Mar 30, 2016
    Messages:
    19
    Ka rizal:
    Step 1: (bingung cara nya gmn)
    Step 2:saat menampilkan tulisam "tidak ada sinyal" itu tidak ada garis vertical
    Step 3:udh di coba "high color" (16bit) jd 2 garis vertical tapi semakin besar, jd di balikan lg ke awal "true color" (32bit)
     
  13. ReyMarelly

    ReyMarelly New Member

    Joined:
    Mar 30, 2016
    Messages:
    19
    ka rizal:
    ini perbedaan loading bios dan pas masuk windows :3 IMG_20160403_183424.jpg IMG_20160404_152249.jpg
     
  14. Rizal Faisal Akbar

    Rizal Faisal Akbar Well-Known Member

    Joined:
    Sep 9, 2015
    Messages:
    2,477
    step 1 :
    Cabut kabel power dan cabut semua komponen yang menempel (seperti VGA, PCI-E, dll). Kemudian tekan tombol power dan tahan selama 15-20 detik untuk menghilangkan sisa listrik yang mengalir. kalo kabel power Monitor/LCD menyatu dengan PSU, cabut terlebih dahulu kabel powernya.

    Seperti itu kira-kira. :)

    kalo ngeliat hasilnya sih kayaknya ada permasalahan kalo ga di vga card-nya, di kabelnya, atau di LCD. coba dulu ganti kabel vga-nya dengan yang lain. kalo misalnya sama saja, coba pindahkan ke vga internal (yang dibelakang samping port COM warna biru kalo ada). atau coba lcd agan di tes dengan disambungin ke laptop atau TV Box. kalo misalnya tetep sama, berarti ada kemungkinan LCD bermasalah. tapi kalo bersih, berarti vga agan yang sedikit bermasalah.

    jadi saran ane langkah yang harus di cek :
    1. Coba ganti dulu kabel VGA-nya. Kalo setelah ganti tetep seperti itu penampilannya, lanjut ke langkah ke-2
    2. Coba hubungkan ke Laptop/TV Box/ perangkat lainnya. Disini letak analisisnya. kalo masih nihil, berarti LCD emang rusak. entah di port-nya atau di PCB-nya. Tapi kalo dihubungkan tidak ada masalah, lanjut ke langkah ke-3
    3. Coba hubungkan ke VGA On Board (jika ada). Letak analisisnya, kalo tidak ada masalah, berarti VGA minta ganti. Tapi kalo masih bermasalah, sepertinya ada masalah di motherboardnya. antara konslet atau socket-nya bermasalah. bawa ke service center/ke tukang service terpercaya.

    Dicoba aja saran ane. Semoga berhasil :)
     

Share This Page