1. Hello Guest, selamat datang di Forum WinPoin. Kamu bisa bertanya, berdiskusi, sharing, dan ngobrolin apapun seputar Windows, Windows Phone, PC, Gadget, atau hal seputar Teknologi lainnya. Selamat berkomunitas! ;)

Windows Update tidak bisa checking for update

Discussion in 'Windows 8' started by Gotcha, Jan 23, 2016.

  1. Gotcha

    Gotcha New Member

    Joined:
    Jul 20, 2015
    Messages:
    7
    Awalnya gara freeze pas lagi isntalling update, jadi saya matikan laptop dengan menahan tombol power. setelah itu pas saya mau checking update malah ga bisa. mohon solusinya
    cara yg telah saya coba dan masih tetap sama alias gagal:
    1. Troubleshoot dengan windows update
    2. Windows Update Diagnostic
    3. CMD : Checkhealth, Scanhealth, Restorehealth[​IMG]
    mohon bantuannya, terimakasih
     
  2. FerryAgusta228

    FerryAgusta228 New Member

    Joined:
    Oct 1, 2015
    Messages:
    20
    sudah coba cara ini ?
    1. Buka Windows Update
    2. Change setting
    3. Pilih Automatically download and install updates
     
  3. Mochamad

    Mochamad Guest

    Hi,
    Error code 8024402C: This error might be caused by a program running on your computer that's preventing Windows Update Services (SVCHOST) from accessing the Internet. Programs that might do this include firewalls, antispyware software, web accelerators, Internet security or antivirus programs and proxy servers.

    If you have any of these programs running, you might need to turn them off while downloading and installing updates. I would recommend you to turn them back on after updating your computer.

    Method 1: Temporarily disable the Security software and see if the issue persists.
    a: Press Windows logo + Q to open the search box.
    b: Now click Settings and then type Action center, hit enter.
    c: Click the Chevron next to security.
    d: Turn off the Anti-virus installed on the computer.

    Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Perform steps mentioned below and see if it helps.
    a: On the Start screen, type cmd. Alternatively, swipe in from the right, tap or click Search, and then type c.
    b: Tap or click cmd in the search results.
    c: At the command prompt, type the following commands, and press Enter after each command:

    net start bits
    net start wuauserv


    Please reply if you have any questions. Sumur dari sini.
     

Share This Page